Skip to main content

No network on Fedora 9 x86_64 follow up

Following my post related to NetworkManager. I have found out about the workaround. If you have x86_64 system with 4GB support enabled, you should disable it in order to make NetworkManager work. I am not sure if that bug affects other distributions so, possibly the bug may be related to the x86_64 kernel. Let see if my theory can be verified.

Comments

Eugene said…
That's strange. I am using Fedora 9 x86_64 with 4GB RAM, and I don't have any problem with NetworkManager.
Anonymous said…
same here.

Currently using x86_64 with 4gb + networkmanager. No such issues.

Its a Thinkpad T61 with Intel 3945ABG wireless
Further investigation, it appears the bug is more kernel related than NetworkManager with the use of skge module. My system uses Marvell Yukon Ethernet integrated in the Gigabyte GA-K8NSC-939. Maybe the skge module does not support 4GB so I have submitted the bug for that reason.
Jiggy said…
I had the exact same problem with very similar hardware. Your post helped me get some ideas, I tried a bunch of different things. Did some packetsniffing etc.

Turns out it is something specific to the Marvell network card. I have two NICs on my motherboard and I tried the other one (Nvidia) and network seems to work perfectly! So maybe your problem could be fixed/worked around by trying a different network card.
I took an old Dlink Ethernet card, enabled 4GB RAM support on the motherboard and now runs Fedora 9. The issue related to Marvell network card about the 4GB RAM is confirmed thus definitely a kernel bug.
Anonymous said…
Fedora 9 x86_64 - The network icon next to my name and date always shows that there is no network available, and I usually have to manually restart networking a few times, click on the icon and enable and disable networking a few times, as well as fiddle with "work offline" back and forth in my Firefox browser. Sometimes it starts working quickly, other times I have to play with it for 10 minutes before I can reach the internet. Regardless, the icon always shows up as disconnected even if I am able to access the network. A search of the internet has not assisted me in my quest to resolve the issue. Can anyone help?
Could you provide your Ethernet card specification?
Anonymous said…
Good work people. I have a GA-K8NSC-939 + Athlon 3200+ and 4GB. I'm running Ubuntu 8.04 wuth an updated 2.6.24-17 64-bit kernel. I see the same problem.
When I upgraded from 2GB to 4GB, I went into the BIOS, Ctrl-F1 to get to the advanced chipset features, then enabled 4G RAM support. After that, when I booted I couldn't access the network. Interestingly, there was a boot-time message from the kernel
skge eth1: enabling interface
, so I didn't look there for the problem.


After reading the posts here I went back, disabled 4G support and got my network back - at the cost of a few hundred MB of RAM. The kernel now only sees 3584MB instead of the 4096MB it saw before.


Pete

Popular posts from this blog

GNOME extension Screen Autorotate available

 While waiting for a bug fix affecting majority of 2-in-1 laptops running on GNOME Wayland session, gnome-shell-extension-screen-autorotate is now available in Fedora repository and EPEL 9 . Give a try on your device Possibly this extension will get added on the incoming Fedora Design Suite 39 as default for the owners of convertible laptops.

Testing Design Suite on Asus X550ZE

I recently bought an ASUS X550ZE to replace the venerable Sony VAIO N250E laptop. The reason of choosing an AMD powered laptop is for long term support i.e. the use of Vulkan API in future AMD GPU driver. In summary, here is the ASUS X550ZE specification taken from ASUS website : Processor AMD® APU A10-7400P /A8-7200P/FX-7600P Processor Chipset AMD A76M FCH Memory DDR3L 1600 MHz SDRAM, 8 GB Display 15.6" 16:9 /Full HD (1920x1080) Graphic AMD Radeon® R5 M230 + Radeon® R7 M265 DX Dual Graphics with 2GB DDR3 VRAM Built-in A10-7400P Storage 2.5" 9.5mm SATA 1TB 5400/7200 RPM Optical Drive Super-Multi DVD Card Reader 2 -in-1 card reader ( SD/ SDHC/ MMC) Camera VGA Web Camera Networking Integrated 802.11 b/g/n Built-in Bluetooth™ V4.0 (Optional) 10/100/1000/Gigabits Base T Interface 1 x COMBO audio jack 1 x VGA port/Mini D-sub 15-pin for external monitor 2 x USB 3.0 port(s) 1 x RJ45 LAN Jack for LAN insert 1 x HDMI Audio Built-in

Using AMD RX Vega driver OpenCL on Fedora 29

The Raven Ridge APU is very capable processor to handle OpenCL inside some applications like Blender, Darktable and Gimp. Unfortunately, the current implementation from Mesa, clover, stuck to 1.3, is not supported. AMD released their driver 18.40 with OpenCL2.0+ targeting only Red Hat Enterprise Linux/Cent OS 6.10 and 7.5 in addition of Ubuntu LTS. The good new is the former rpm format can be used on Fedora. The graphical part of Raven Ridge is Vega 8, basically a cut-down of Vega56 or Vega64 meaning choosing either driver for RX Vega . The instruction is provided for extracting the rpm files but here is  some requirements for OpenCL: kernel-devel (provided by Fedora repository) amdgpu-dkms dkms libopencl-amdgpu-pro opencl-amdgpu-pro-icd Once done, applications needing OpenCL will automatically detect the driver located on /opt/amdgpu/lib64 . Blender will list as unknown AMD GPU and Darktable will enable it. OpenCL from official AMD driver enabled on Darktable Ra