Skip to main content

Fedora 11 on Xnote LT20 and more

Task done so far:
  • Replaced Windows XP by Fedora 11 on a client's Toshiba Satellite that works out of box except media hotkeys.
  • Completed an article of Fedora 11 for a small magazine editor.
  • Installed Fedora 11 on LG Xnote LT20.
Installing Fedora 11 on LT20 note had some trouble start like DVD freezing on first try after doing the test. A second try went smoothly. For the first time, I was able to see the smooth transition of boot process to the login screen unlike my Nvidia powered desktop.
Power management works well although the battery consumption seems to be higher than usual (maybe I need to replace it). Suspend and Hibernate flawlessly work. The screen made from Wacom technology works out of box, I only need to set up Gimp and Inkscape to support screen mode although I wish the support is done automatically.
Rotating screen was the problem because of the transition went flaky as the width went off screen. The button for rotation will not be recognized and will not work at all. I will submit a bug report when I will get a chance

Comments

Popular posts from this blog

GNOME extension Screen Autorotate available

 While waiting for a bug fix affecting majority of 2-in-1 laptops running on GNOME Wayland session, gnome-shell-extension-screen-autorotate is now available in Fedora repository and EPEL 9 . Give a try on your device Possibly this extension will get added on the incoming Fedora Design Suite 39 as default for the owners of convertible laptops.

Testing Design Suite on Asus X550ZE

I recently bought an ASUS X550ZE to replace the venerable Sony VAIO N250E laptop. The reason of choosing an AMD powered laptop is for long term support i.e. the use of Vulkan API in future AMD GPU driver. In summary, here is the ASUS X550ZE specification taken from ASUS website : Processor AMD® APU A10-7400P /A8-7200P/FX-7600P Processor Chipset AMD A76M FCH Memory DDR3L 1600 MHz SDRAM, 8 GB Display 15.6" 16:9 /Full HD (1920x1080) Graphic AMD Radeon® R5 M230 + Radeon® R7 M265 DX Dual Graphics with 2GB DDR3 VRAM Built-in A10-7400P Storage 2.5" 9.5mm SATA 1TB 5400/7200 RPM Optical Drive Super-Multi DVD Card Reader 2 -in-1 card reader ( SD/ SDHC/ MMC) Camera VGA Web Camera Networking Integrated 802.11 b/g/n Built-in Bluetooth™ V4.0 (Optional) 10/100/1000/Gigabits Base T Interface 1 x COMBO audio jack 1 x VGA port/Mini D-sub 15-pin for external monitor 2 x USB 3.0 port(s) 1 x RJ45 LAN Jack for LAN insert 1 x HDMI Audio Built-in

Using AMD RX Vega driver OpenCL on Fedora 29

The Raven Ridge APU is very capable processor to handle OpenCL inside some applications like Blender, Darktable and Gimp. Unfortunately, the current implementation from Mesa, clover, stuck to 1.3, is not supported. AMD released their driver 18.40 with OpenCL2.0+ targeting only Red Hat Enterprise Linux/Cent OS 6.10 and 7.5 in addition of Ubuntu LTS. The good new is the former rpm format can be used on Fedora. The graphical part of Raven Ridge is Vega 8, basically a cut-down of Vega56 or Vega64 meaning choosing either driver for RX Vega . The instruction is provided for extracting the rpm files but here is  some requirements for OpenCL: kernel-devel (provided by Fedora repository) amdgpu-dkms dkms libopencl-amdgpu-pro opencl-amdgpu-pro-icd Once done, applications needing OpenCL will automatically detect the driver located on /opt/amdgpu/lib64 . Blender will list as unknown AMD GPU and Darktable will enable it. OpenCL from official AMD driver enabled on Darktable Ra